News Category Home > Transmission technology

Indexing drive product selection principle parameters Cam indexing drive selection

Views : 96
Update time : 2019-04-12 20:13:41
  The product selection of the indexing drive  is the work that must be done before the cam indexing drive  is used. For the three commonly used types, Li Anyin Xiaobian is here to make a detailed explanation for everyone.
   The first thing to say is the more disk drive used in the cam indexing drive . The following parameters should be specified in the indexing drive  selection: 1. The number of divisions (indicating that several workstations are required), that is, a cycle of 360 degrees. The output shaft should be stopped several times. 2. The selection of the driving angle, that is to say, the angle at which the input shaft drives the output shaft to be expressed by the symbol in the angle. 3. The number of revolutions per minute of the input shaft, and the axis in the unit time. It is necessary to rotate several cycles, denoted by RPM. 4. The diameter D of the disc driven, and the thickness of the disc, expressed in mm. 5. The weight of the fixture on the drive disc, expressed in Kg, 6. Working weight per group, Expressed by Kg, 7. Fixture and workpiece fixed circle diameter, unit mm, 8. Whether there is support at the bottom of the disc, that is, the radius of support, the unit is expressed in mm. Also know the cam indexing drive  mounting surface code PSTUVW, in the selection Self-calculation in the process and selection by the manufacturer are required.
indexing drive,indexing gearbox
Another type is the conveyor belt drive mode. The parameters to be specified in the cam indexing drive  selection: 1. Indexing drive  (indicating that several workstations are required). 2. The input shaft drives the angle at which the output shaft rotates. 3. The input shaft per Minute speed. 4. Conveyor belt conveying distance. 5. Driving wheel is the diameter of the circle. 6. The driven wheel is the diameter of the circle. 7. The diameter of the shaft is the weight/number. 8. The sprocket is the diameter of the circle. Quantity. Use group to represent. 9. Chain weight. Group weight. 10. Fixture weight per group. Weight of the whole group. 11. Work weight per group. Weight of all working groups. Mounting surface code PSTUVW, during the selection process Self-calculation and selection by the manufacturer are required.
Another type is the gear indirect drive technology. The parameters to be specified in the cam indexing drive  selection: 1. The number of divisions (indicating that several workstations are required). 2. The input shaft drives the angle at which the output shaft runs. 3. Input force The number of revolutions per minute of the shaft is 4.4. The diameter of the drive wheel is the diameter of the circle. The weight is 5. The driven wheel is the diameter of the circle. The weight is 6. The weight of each set of the clamp. The quantity. 7. The weight of each set of the workpiece. The number of the fixture is fixed and Round diameter. 9. Whether there is support at the bottom of the disc. (Radius of support) Mounting surface code P STUVW, self-calculation in the selection process and selection by the manufacturer.
The above are the 3 common drive technology support information for DS/DF cam indexing drive . For some special requirements, it should be provided by engineering technicians or manufacturers before the selection. These parameters are also selected by the manufacturer for the customer. Basic technical data must be submitted to the manufacturer's technical department for the relevant technical personnel to select the cam indexing drive .