News Category Home > Industry News

How to use the cam indexer at different temperatures,index table manufacturers

Views : 239
Update time : 2019-06-10 20:19:04
Most of the applications of automated machinery are done under normal working conditions, and some industries have special working environments, such as high-low temperature or acid and other corrosive environments. In this case, how to adjust the cam indexer can adapt to automated production. What about the demand? The figure is a indexer that works in a high-temperature corrosive environment. When viewed from the outside, the conditions experienced by the product are relatively harsh.
The indexer works at a suitable temperature. The general standard is defined between 0 and 40 degrees Celsius. The temperature we are talking about is the effect of the temperature on the indexer. It does not consider the thermal expansion and contraction of the cam indexer in high and low temperature environments. The impact of the entire system, because for this factor, at the beginning of the indexer selection, as an element of special condition selection. Discussed here is the effect on the lubricant used in the indexer due to changes in temperature. The inner part of the indexer cooperates with the movement, and a certain amount of lubricating oil is added. On the one hand, it plays an auxiliary role of lubrication, and at the same time, it contributes to the heat dissipation of the component due to friction. To sum up, in a working environment outside the standard temperature range, the oil used in the indexer needs to be adjusted.
cam indexer,index table manufacturers
Below "-20 to 0" degrees, the viscosity of the oil inside the divider will increase, and the adhesion of the surface of the moving member will increase, which will affect the running speed of the entire transmission system. Therefore, if a lubricant with excessive viscosity is used, It will increase the burden on the components, especially the rotating components. A good practice is to use low-viscosity lubricants at low temperatures. The selection of the oils will be described in detail in the manufacturer's instructions.
Above 40 degrees, the cam indexer itself has a higher temperature, and the heat generated during the movement will be higher than the temperature in the environment. In this case, if the viscosity is not high, the oil will Accelerate the wear of the cam and needle of the indexer, affecting the life of the indexer. Therefore, in various industries, in the selection of the indexer for the automation system, it is necessary to comprehensively consider the working environment factors of the indexer. For the excessive ambient temperature, it is necessary to evaluate the effectiveness of the indexer manufacturing materials in the early stage to ensure the effectiveness. The deformation data generated by the heat exchanger due to the heat of the divider.