News Category Home > Industry News

How to Establish Technical Inspection System for Cam indexer Manufacturers

Views : 110
Update time : 2019-03-09 22:20:05
1. When the system is shut down, the surface of the cam indexer is clean, and there are debris, iron chips and cutting materials around the transmission system connected with the cam indexer, so as to avoid the equipment jamming during operation. Check the oil quantity in the oil mirror of the cam indexer and observe whether the oil body in the oil mirror is turbid. Replenishment and replacement of oil products as appropriate. The input and output shafts of the cam indexer and the transmission parts should be inspected daily, including the coupling, belt pulley, sprocket, gear, etc.
Whether the synchronous wheel and the output transmission body, synchronous belt are relaxed, the belt and sprocket tension, gear meshing clearance and other components are in a normal state. For belt clearance measurement, it is recommended that professionals use special measuring tools to measure belt clearance. Inspection of fastening screw, especially in the case of equipment maintenance and disassembly, should confirm the relevant fastening screw one by one.
2. Confirmation of start-up operation status: whether the operation is stable, whether there is abnormal vibration, whether the surface of the body is shaking, whether there is abnormal sound, whether there is backing impact in the static area of the cam. Whether there is step loss in the corresponding number of segmentation. Regular disassembly of the mechanism by professionals, inspection content: whether the surface of the cam is damaged, according to the degree of damage by professional engineers or manufacturers to confirm, whether to repair or replace, in the case of repairable, pay attention not to adjust the axial position; check the needle roller bearings in the cam indexer, whether damage, if abnormal, timely output segmentation Shaft removal confirmation, needle roller bearings should be replaced if necessary.
For the spot inspection project of cam indexer manufacturer, it should be specially managed and detailed record tables of each cycle should be established. And make a Summary Archive for technical documentation. Daily spot check of cam indexer is a very important work. On the one hand, it ensures the normal operation of the whole equipment, on the other hand, it is also the basis of analysis and extraction of technical parameters in the process of product output. It is hoped that it can arouse the attention of engineers and technicians.