News Category Home > Transmission technology

How to calculate the disc accuracy using the cam indexer

Views : 148
Update time : 2019-04-30 21:32:31
In the design of the  cam indexer of the automation equipment, for the disc type output platform, the accuracy is the primary consideration of the designer, then how to calculate the accuracy of the output disc?
The accuracy of the disc = 2πr ÷ 360 ÷ 60 ÷ 60 × divider accuracy, which is the product of unit time and unit angle value and the accuracy of the divider itself.
The angular error of the disc is proportional to the error of the radius. That is to say, the larger the radius of the disc is, the larger the angular error is. The disc is mounted on the output shaft. The diameter of the disc is selecte according to the torque. The size, which is the allowable output shaft torque load of the output shaft.
In the case of high accuracy requirements, the torque should be greater than 2-3 times the allowable output torque; therefore, the rotational speed of the output shaft is also an important factor in the accuracy impact. In actual use, the larger diameter of the disc should be less than 5 times the central moment to ensure better accuracy.
Under normal circumstances, the accuracy level can reach 30" in the case of the common level cam indexer, and 15" for the equipment with high precision requirements, it is necessary to pay attention to the influence of the diameter of the disc. At the same time, the disc Installation needs to be noted that the gap between the connections will also cause deviations in accuracy.