News Category Home > Industry News

The reason why the output of the cam indexer is not average,cam indexer manufacturers

Views : 225
Update time : 2019-06-08 17:48:19
 What is the uneven output of the cam indexer? The initial use of the indexer will not feel the head when this problem occurs, because if the output action is uneven, it will affect the effect of the entire automation system operation, the theoretical design of the mechanical action is fixed, and the actual is not ideal. The effect, there must be some abnormal factors.
The uneven output speed of the indexer mentioned here means that in the automated multi-station disc machine, the output time of the previous station takes 1 second, and the time of the next station takes 1.2 seconds or 1. Above two seconds, the output time of the two stations is inconsistent, because in the mechanical design of an automation system, each machining action and mechanical movement must be coordinated and unified in speed and time to achieve stable operation.
The reason why the output of the cam indexer is not average,cam indexer manufacturers
First of all, we must confirm the speed of the input shaft of the indexer. We know that the output shaft is driven by the input shaft. If the input speed of the input shaft is not uniform, the input speed is not even, which will result in The output speed is not average. In the previous chapter, the drive of the input shaft we mentioned is done by the motor. The stability of the current is an influencing factor for the input. Similarly, if the motor runs too slowly. Causes the output speed of the indexer output shaft to be uneven.
Secondly, after this situation occurs, it is also necessary to confirm whether the connection of the connector on the output shaft is stable. This phenomenon often occurs in actual operation. During the whole system operation, each component is installed in place, but still appears. In the case of body error offset, all installations and fasteners should be re-examined and tightened.
In addition, if the rotation speed of the indexer is too high or the load is too large, the output speed of the indexer will be uneven. If the speed and load exceed the design range of the indexer itself, the mechanical fit will be abnormal. The solution is Need to slow down or reduce the load. If the operating speed and load have been adjusted or can not meet the requirements, then you must choose a larger model of the product, adding that the indexer must pay attention to the selection process at the beginning of the use. In addition, for the uneven output of the indexer, it is also necessary to check and confirm the factors such as the mounting plane of the indexer.
google-site-verification=_ej7hxJsw_gXF58XXTMiEfeGdZHavARQD5ia3zvR7bw