News Category Home > Transmission technology

Rotary indexing table cleaning

Views : 31
Update time : 2019-09-28 20:56:25
 Before the assembly of the Rotary indexing table, the Rotary indexing table box, cam, turret, bearing and other components must be thoroughly cleaned. The traditional process is to use kerosene to clean the kerosene to remove oil and to achieve a certain effect of rust removal. Basically, it can meet the requirements of Rotary indexing table assembly, but with the national environmental protection and fire protection requirements of the factory and the working environment requirements of employees, the kerosene cleaning process is outdated. At present, some cam divider manufacturers continue to use the kerosene cleaning process.
Rotary indexing table
 The new process is to use an environmentally friendly cleaning agent to clean the splitter, which can achieve cleaning effect and environmental protection. If there is rust on the parts, the rust should be removed with a rust remover, then cleaned with water and then cleaned, then cleaned with water, and finally dried or dried. And timely assembly, paint and lubricant in time after assembly, so as not to rust the Rotary indexing table again.
 It is important to note that when the Rotary indexing table is assembled, there will be a small amount of manual grinding of the cam and grinding. It is difficult to clean the grinding inside the box by the soaking method. It is necessary to use a flushing method to remove the grinding inside. cut.
 The Rotary indexing table must be cleaned before and after assembly.Rotary indexing table cleaning
 Before the assembly of the Rotary indexing table, the Rotary indexing table box, cam, turret, bearing and other components must be thoroughly cleaned. The traditional process is to use kerosene to clean the kerosene to remove oil and to achieve a certain effect of rust removal. Basically, it can meet the requirements of Rotary indexing table assembly, but with the national environmental protection and fire protection requirements of the factory and the working environment requirements of employees, the kerosene cleaning process is outdated. At present, some cam divider manufacturers continue to use the kerosene cleaning process.
 The new process is to use an environmentally friendly cleaning agent to clean the splitter, which can achieve cleaning effect and environmental protection. If there is rust on the parts, the rust should be removed with a rust remover, then cleaned with water and then cleaned, then cleaned with water, and finally dried or dried. And timely assembly, paint and lubricant in time after assembly, so as not to rust the Rotary indexing table again.
 It is important to note that when the Rotary indexing table is assembled, there will be a small amount of manual grinding of the cam and grinding. It is difficult to clean the grinding inside the box by the soaking method. It is necessary to use a flushing method to remove the grinding inside. cut.
The Rotary indexing table must be cleaned before and after assembly.
 
google-site-verification=_ej7hxJsw_gXF58XXTMiEfeGdZHavARQD5ia3zvR7bw